Jump to content
Banhammer Forums

Goldgold111

Members
  • Content Count

    8
  • Joined

  • Last visited

  1. First, theBeverage Can Making Machine adjusts the distance between the can support plate and the pressure head: loosen the backup cap on the guide shaft (screw) at the lower end of the can support plate, rotate the can support plate, and take the contact between the pressure head and the lid as the base point. Rotate the can-supporting plate upward by 2---3mm to tighten the spare cap. Second, adjust the distance between the indenter and the sealing wheel: firstly adjust the left and right distance between the indenter and the first sealing wheel, based on the 0.5mm distance between the sealing wheel and the indenter, and the indenter and the sealing wheel will not rub against each other , The smaller the distance, the better; adjust the upper and lower distance between the indenter and the first sealing wheel, the lower end of the sealing wheel and the upper end of the indenter are subject to the minimum gap that does not contact. Next, adjust the distance between the indenter and the second sealing wheel in the same way. Third, the gap between the pressure head of the beverage can making machine and the sealing wheel: can be adjusted according to the hardness of the lid. The iron cover can be adjusted closer. The aluminum cover can be adjusted farther. After adjustment, tighten the fixing screws and try to seal 2-------3. After checking that it meets the standards, it can work continuously. Fourth, every time you change the tank type, you need to change the pressure head and the tank tray according to the size of the lid. Fifth, mechanical maintenance: the motor is indispensable, the gear transmission part is added with lithium-based lubricating oil once a month, the motor spindle runs and the tank tray does not rise, adjust or replace the V-belt. If you are interested in can making machine, welcome to your come and purchase!
  2. Industrial assembly line is the continuous conveying of goods handling machinery on a certain line, also known as conveyor line or conveyor. According to the conveyor series products, it can be roughly divided into: belt conveyor line, plate chain line, automatic plug-in line, home appliance assembly line, logistics roller conveyor line, spraying production line, food machine production line and other assembly lines. Generally include traction parts, load-bearing components, driving devices, tensioning devices, redirecting devices and supports. The conveyor can carry out horizontal, inclined and vertical conveying, and can also form a spatial conveying line, which is generally fixed. The industrial assembly line has large transportation capacity and long transportation distance. It can also complete several process operations at the same time during the transportation process, so it is widely used. Industrial assembly line is an effective combination of man and machine, which fully reflects the flexibility of equipment. It organically combines conveying systems, accompanying fixtures, online special machines, and testing equipment to meet the conveying requirements of multiple products. The transmission mode of the conveyor line can be synchronous transmission/(mandatory) or asynchronous transmission/(flexible). According to the choice of configuration, the requirements of assembly and transportation can be realized. Welcome to send us messages if you are interested in Food Can Making Machine!
  3. 1. According to the movement of the object, the food machine production line can be divided into a fixed line and a moving line. 2. According to the number of production lines, production lines can be divided into single production lines and various production lines. 3. The production line can be divided into linear production line and discontinuous production line according to continuous production mode. 4. The way the assembly line realizes the rhythm can be divided into mandatory line and free assembly line. 5. According to the degree of mechanization, the production line can be divided into three major production lines: manual, mechanized, and automated. Welcome to conatact us if you are interested in Food Can Making Machine!
  4. In the process of production and processing, the food machine production line also has certain safety and operation requirements for those equipment. After all, these equipments may be injured by it if people are not careful and cautious. When working, for most people, how to carry out the corresponding management is a more important issue. The mechanical equipment on the automated assembly line is supervised and used by professionals in every step, and in the process of use It can be found that most people want to know more about this mechanical equipment when they see it, so that it will be more convenient to use. Each mechanical equipment has a specific regulation and system in the process of operation. Only by following the instructions can oil be used to achieve better results.    For most people, in the process of use, you can find that good mechanical equipment can be felt during operation. Many people hope to get more from it. Profit is of course in the process of operation, and sometimes people look forward to its work. In use, if the equipment on the automated assembly line is operated, better production results can be achieved. For most people, in the process of use, good production equipment can meet people’s needs, and Let everyone know how to use it to get better results. There are also many safe operation procedures for assembly line manufacturers. This process allows people to understand more clearly how to operate in order to achieve a higher level. If you are interested in Food Can Making Machine, welcome to contact us!
  5. In addition to the purpose of using the food machine production line turning conveyor, the conveying equipment and assembly line need to be specifically designed according to the specific conditions when using the turning, lifting and other device functions. Also consider safe operation and structural reliability for long-term use. So what are the configurations of the turning conveyor on the production line? The following is shared by Shenzhen assembly line equipment manufacturer Guang Shengde: Electronic product production line The turning conveyor of the production line needs to change the conveying and running direction, because of the factors such as process and site in the assembly line system. Therefore, turning conveyors of various structure types are needed. The most commonly used turning devices of conveying equipment in the assembly line include turning roller conveyors, turning belt conveyors, turning chain conveyors, corner mechanism rotating tables, translation carts, jacking translation transitions, and so on. 1. Roller-type turning conveyor Roller turning conveyor The structure is simple, and the turning roller conveyor is the most commonly used conveying equipment to realize the horizontal turning of the conveyor line or the turning of the slope. The price is low, and there are two drive modes: hand push or motor drive; the frame has three types of stainless steel, carbon steel, and aluminum; the rollers are all conical rollers, and the angle needs to be designed according to the turning radius and the width of the conveyor line; The surface of the drum is galvanized with carbon steel, coated with rubber, polyurethane, etc., or materials with craft pallets. The turning roller conveyor is suitable for conveying workpieces with a flat bottom. 2. Belt line turning conveyor Belt type turning conveyor The motor drives the roller to drive the belt line to run. The turning belt conveyor uses tapered rollers at both ends and a series of limit angle roller groups on the assembly line to limit the conveyor belt guide bar to run within the track. Therefore, under normal circumstances, it runs synchronously with the linear belt conveyor. It is suitable for conveying lighter materials, and the turning belt conveyor needs an independent driving device. Irregular shapes can also be conveyed, but the size of the material needs to be larger than the gap size of the transition section. If the material is small and needs to be transported, the transition between the two conveyor lines can be designed with a height difference and staggered arrangement, but the material must be able to accept a fall. 3. Rotating table of corner mechanism On the platform mechanism, roller conveyors, belts, double-speed chains, plate chains and other conventional conveyors can be set. The rotating table of the angle mechanism actually rotates a platform mechanism at a certain angle. Then rotate the turntable along the center of rotation in several ways. The power of the rotating table of the angle mechanism generally has a cylinder or a motor to push the rack and pinion, the motor is driven by the transmission pair, and the motor drives a corner of the rotating table. Welcome to contact us if you are interested in Food Can Making Machine!
  6. Maintaining a safe and productive work environment is the most vital thing in the world for businesses. It doesn’t matter if you work in a manufacturing plant, an office, or anywhere else. Nothing tops the safety of your team members. Because of that, it’s also essential to keep food machine production line equipment dependable and safe at all times as well. Factory employees get a lot out of using safety gear. If you want to prioritize worker safety, you should look into your choices of sturdy gloves, sleeves, cape sleeves, rod holders, jackets, and additional safety measures. The more bodily defense a worker has, the easier it will be for them to remain 100 percent safe while on the job. If you are interested in Food Can Making Machine, welcome to contact us!
  7. This model is mainly used for automatic capping of cans. The production speed is generally 50~200 cans/min. principle: 1. When the cans are filled from the upper channel and flow into the sealing machine. 2. The can sealing machine that brings the cans into after the six-prong rotation. The jar is capped by an automatic cap dropper. 3. The six forks continue to rotate to the next station, and the first curling knife starts to pre-curling. 4. Six forks continue to rotate to the next station. The second crimp is pressed against the edge. 5. Finished product output. Application range of Food Can Making Machine: Fully automatic sealing machine is a production line for multiple and large batches of single products. According to the different materials, the front process of the automatic filling machine is often equipped with a fluid filling machine, a powder filling machine, etc. The post process is often matched with labeling machines, inkjet printers and other equipment. Production line process: The packaging process of canned beer is simpler and easier to control than bottled and barreled. The main equipment of an automated canning line consists of a depalletizer, a canned wine-roll sealer, a sterilizer, and a cartoner/sealer. The filling speed can reach 1000cpm, which is comparable to the canning machine of Tingzi Factory. If you are interested in food machine production line, welcome to contact us!
  8. Schedule preventive maintenance. A little prevention can go a long way toward warding off bigger problems later. Many companies schedule equipment checkups on a regular basis. Scheduling reminders for maintenance can help your staff remember when checkups are due. Stick to a schedule. A food machine production line that isn’t in sync is a production line that’s less than efficient. Timing and coordinating steps in the process ensures efficiency by minimizing downtime and removing redundancies. Buy up-to-date software. Software likely plays a large part in maintaining your plant’s efficiency, so make sure the programs you’re using are up to date and easy to use. Intuitive, reliable software can boost productivity and lower labor costs by helping to streamline your process. Promote communication between engineering and manufacturing. Fostering communication between the workers who deal with your equipment every day and the men and women who keep things running smoothly is another way to ward off big issues with production. Encourage your engineers to participate in the manufacturing process by spending time among line workers and leads. That way, they can hear feedback and comments that can help them uncover issues faster. Keep your equipment happy. Keep track of the way your equipment operates from the time it’s installed. Be sure that the machines on your production line are getting the right amount of electricity and water. If the electrical or water supply changes at your facility, follow up to ensure that it doesn’t affect your equipment’s performance and life span. If you are interested in Food Can Making Machine, welcome to contact us!
×