Jump to content
Banhammer Forums


  • Content Count

  • Joined

  • Last visited

Everything posted by luhongxiang

  1.    1. Check the shell of the Corn Sheller, wherever it is immersed in water, there will usually be mud marks or discoloration, and then carry out targeted maintenance according to the degree of moisture.    2. Scrub or rinse the mud left on the surface with clean water. Clean up weeds, broken branches, plastics hanging on reels, distributors, distributors, conveying troughs, header crank and rocker mechanism, clamping fingers, clamping chains, vibrating screens, grain harvesting ports, transmission belts, pulleys Bags and other debris, clean up dirt, stones and other debris on the roller, guide wheels, crawlers, and header conveyor screws.    2. Turn over the lid of the transport tank to clean up the remaining impurities in the transport tank; remove the transport chain, clean it with diesel, dry it, soak it in oil and reassemble it. If the scraper is damaged, the scraper should be replaced.   3. Rinse and clean the sediment on the vegetable transplanter with clean water, especially the gap between the moving blade and the fixed blade, and the gap between the blade and the guard blade. Care should be taken to avoid blade damage caused by mixing of hard sand. 4. Open or remove the rear cover and side cover of the harvester, check and clean up the soil and residual weeds in the conveying screw, sweeping fan, vibrating screen and its crank and rocker structure, and check the vibrating screen, concave screen, and fish scale screen. Check whether the sieve holes are blocked and sort them out. If the surface of the sieve is deformed by the impact of a hard object, it should be inspected or replaced. As for the damaged screen, it can be repaired when the damaged area is small, and can be replaced when the damage is severe.    5. Check whether the parts of the Vegetable Planter are deformed, damaged or separated from the blade cylinder. When the blade is partially deformed, it can be struck to restore its original shape. When striking, use a half-round-head wooden hammer to pad the back of the deformed part, and then use another wooden hammer to strike from the front until the blade returns to its original shape. Some damaged blades can be repaired by welding on the panel, and the panel should maintain the original blade shape. The blades should be welded from the beginning.    Hope the above sharing can be helpful to everyone!
  2. luhongxiang

    Adjustment Of Corn Sheller Performance

    1. It adopts sprocket and chain transmission, accurate transmission ratio, accurate plant spacing, stable performance of adjusting Corn Sheller and flexible structure. a. By adjusting the number of vegetable transplanters and replacing the chain wheels, the plant spacing can reach 8-162cm. b. Adjust the rotating drive wheel and screws to reach a planting depth of 5-13cm. c. Rotating the adjusting handle of the covering wheel can increase or decrease the thickness of the covering soil for sealing cutting. The above functions are simple to adjust and easy to operate. 2. Stable, durable and long service life. The parts of this machine are manufactured strictly in accordance with the standard high-strength raw materials, with stable performance. This machine adopts double disc, double cam control board, double linkage shaft, double gear meshing seedling machine, double insurance and other mechanisms to make the work stable. The shock absorber protects the work of the vegetable transplanter. When the vegetable transplanter encounters hard soil or hard rock, the shock absorber plays a direct role in preventing damage to the vegetable transplanter, making the machine durable and having a long service life. 3. Reduce labor intensity and save labor costs. Manual transplantation is the original method. It is not only inefficient, but also labor-intensive. The distance between transplanted plants is uneven, the depth of transplantation is different, and the quality of transplantation is poor. 3-5 people can only transplant about 3 mu. Using Knapsack Fertilizer Machine can achieve the purpose of high production efficiency, low labor intensity and deep seedling transplanting. The degree and row spacing can be adjusted conveniently, which greatly improves the quality of transplanted seedlings. This machine can transplant 5000 to 8000 plants per hour. The three-headed rice transplanter can transplant more than 100 mu of seedlings every day, which greatly reduces the cost of transplanting. The crops have the same growth and maturity period, which is convenient for field management, increases yield, and improves economic benefits.
  3. 1. It is strictly forbidden to keep the key in place after the engine of Knapsack Fertilizer Machine is started, which may cause damage to the starter when the starter is energized for a long time. 2. After the engine is turned off, the ignition switch should be turned off immediately to prevent the battery from discharging the excitation winding of the engine for a long time, which may damage the excitation winding and other components. 3. When the generator is working, it is not allowed to ignite on the "+" armature connection post to check whether the generator is generating power, so as not to damage the generator and burn the wiring harness. When it is found that the generator is not generating electricity, the cause of the fault should be found out in time and eliminated. Long-term operation is not suitable. 4. When the harvester stops working, the operator should pull out the starting key and turn off the main power switch. 5. When operating in the field, start the Corn Sheller, and adjust the height of the header according to the height of the corn. When the return machine or recovery machine is working, slowly lower the return machine or recovery machine, and be careful not to touch the soil with the moving knife. From small to large, gradually reach the rated speed. Slowly drive into the work area at low speed and start the harvesting operation. When passing the ridge or field, the return machine or reclaimer and header should be raised, and sharp turns should be avoided.
  4. luhongxiang

    Corn Sheller Masters The Speed Of Use

    Knapsack Fertilizer Machine is widely used in the agricultural market, but farmers do not understand it. Only after we understand its structure can we use it correctly. The feeding mechanism of the transplanter is mainly a rotary type, which can improve the efficiency of the transplanter. One of the drawbacks of this feeder is that when the operator operates it, the transplantation will be missing when the speed is too fast. You need to master the speed of transplantation to avoid this from happening.   The seedling support device of the vegetable transplanter mainly adopts a net format, which can improve the stability of the seedlings during the planting process and make the seedlings more upright. The grille mainly exerts upward force on the seedlings, making the seedlings stand upright at the same time, preventing the seedlings from being buried by the soil, and completing the supporting role for the seedlings.    In order to send seedlings to the bottom of the nursery ditch, seedling guide tubes are mainly used. The metal mesh belt uses the seedling guide tube to prevent damage to the seedlings. Make the seedlings reach the seedling field smoothly and make the seedlings grow normally. Corn Sheller is suitable for transplanting a variety of crops, can improve the transplanting efficiency, and the plant survival is better, and the yield is relatively good.
  5. luhongxiang

    Jobs Run By Corn Sheller

       Corn is one of the most widely distributed crops in my country. When the corn is threshing, it is a more complicated step in the process of shredding. In the past, most of the cleaning diseases used the deconstruction method. After the centrifugal fan was blown on one side and threshing in one direction, the corn kernels were separated from the impurities. However, if the eyes are large, it is difficult to remove impurities such as eyes and corn beard. This separation method is relatively single, concentrated, and difficult to separate dispersed impurities. The corn coating, fluff, and dust trapped in the corn pellets after household Corn Sheller threshing are easy to prevent, leading to early wear of the wine body, and the impurities are easy to trap corn after separation. After threshing, the corn content is high. In this case, the prior art also has various solutions such as increasing the speed of the fan and applying side air devices. Although it has improved, the effect is mediocre. Aiming at the shortcomings of the prior art, the utility model provides a novel corn thresher sorting trough rod cleaning device. The threshing machine company uses the sorting device to classify the threshed corn particles multiple times, and classifies the corn coating, fluff, snow, and small corn. Impurities such as cores and dust are classified. The perfusion blower is collected and sucked through the connecting channel to completely separate the corn and impurities. Through the splitting of the splitting device and the strong suction of the perfusion fan, impurities can be effectively removed, the above-mentioned shortcomings of the original separation device can be solved, and the cleanliness of the corn can be ensured to a greater extent. Taizhou Luqiao hongxiang agriculture machinery co., ltd also brings you Knapsack Fertilizer Machine professional machinery.
  6. The Manual Corn Seeder now has multiple models and brands. Today we will take a look at the new automatic seedling transplanter, which is suitable for planting crops such as potted plant seedlings, vegetable seedlings, melon and fruit seedlings, and block seeds. A transplanter for planting tobacco seedlings, eggplant beets, peppers, tomatoes, cantaloupe, cauliflower, lettuce, cabbage, cucumber, watermelon, corn seedlings, sweet potato seedlings, stevia, chrysanthemums and cotton. Compared with other types of transplanting machines, it can not only meet the needs of farmers who plant in large areas of multi-row farms, but also transplant seedlings in the greenhouse even in the hills. The new automatic transplanter can fully meet the needs. . The key is that it has advanced technology, reliable performance, simple operation and maintenance, high efficiency, low energy consumption, and long service life. However, during the operation of the fully automatic transplanting machine, it is necessary to ensure that the soil field is meticulously rotated, otherwise it will Damage the machine. Now let’s summarize the advantages of the seedling transplanter:    1. Advanced technology, high quality of transplanting   2, novel structure, wide application range   3, reliable performance, flexible operation, easy adjustment, reliable transmission ratio, accurate transplanting plant spacing.   4, reliable work, sturdy and durable, long service life   5. Corn Sheller reduces labor intensity, saves labor costs, high efficiency, and low finished products
  7. luhongxiang

    The Oil Used For Manual Corn Seeder

    One is that the engine processing of Manual Corn Seeder's oil micro-cultivator is very precise, and the oil is also very demanding. You need to use qualified canned diesel engine oil, use 30 diesel oil in autumn and winter, and use 40 diesel oil in spring and summer. , And change in strict accordance with the working hours. The running-in is to change the oil after the micro tiller works for 15-20 hours, the second time is 50 hours of work, and the third time is 100 to 150 hours. The gearbox also needs diesel oil, not gear oil. The second is to make necessary tightening and adjustments in time. In many places of the tiller, after a period of use, the gap of some parts will increase, and the user must make the necessary adjustments. The clutch, reverse gear, throttle, steering, etc. of the tiller are all operated by the cable, and the cable is easily deformed and elongated, so it must be adjusted in time through the adjustment screw. There is also a certain gap between the first shaft, the second shaft, and the two pairs of bevel gears of the gear transmission box after a period of time. The first and second shafts are adjusted by tightening the rear end screws. Shims to adjust. During use, the micro tillage machine must be tightened every day. But pay special attention to the fact that the screws of the tiller engine should not be easily tightened, mainly those screws directly on the aluminum alloy shell. Third, the maintenance of Corn Sheller is mainly to clean and tighten the screws every day after use, correct the deformation in time, and perform anti-rust treatment in winter.
  8. luhongxiang

    Is The Manual Corn Seeder Reliable?

    At present, many people are still engaged in manual seeding. This traditional method not only requires a large amount of labor resources, but also is not efficient and cannot adapt to the current development of agricultural society. Under this circumstance, Corn Sheller came into being. Its appearance design is humanized, it is a high-end model, integrated with the current advanced agricultural technology, and its performance is relatively stable. With it, you can say goodbye to traditional manual seeding, because it can provide professional seeding. The vegetable planter is light and labor-saving when used. It can ditch and cover the soil, and it can also adjust the row spacing. The power is very sufficient. In this technological age, it incorporates high-end technology, which naturally improves work efficiency. It has a wide range of applications. It can be used in fields, greenhouses, mountains, dry land, hills, plains, vegetable fields, etc., and is mainly used in various fields. Planting vegetables, flowers, medicinal materials and other small particles of seeds, especially suitable for different types of seed sowing, according to different seed sizes can choose different diameter seeding wheels. When everyone used it, they found that the ground was even, the emergence rate was high, and the later stage was free of thinning. If you buy Manual Corn Seeder online, since this kind of machinery and equipment is a large item, the cost of express delivery is relatively high. Generally, logistics transportation is used. There are different freight rates across the country due to different distances. Before you buy it It is necessary to connect with the customer service to deal with the freight issue. At present, the machine has a certain period of after-sales service. You can rest assured to buy products with good brands and good reputations. They are worthy of everyone’s trust. If you want to quickly improve the efficiency of vegetable planting, then quickly buy one, one in hand, It's better than a few workers, whether it's okay or not, just try it and you'll know.
  9. luhongxiang

    Composition Of Manual Corn Seeder

      Manual Corn Seeder composition and use method, the transplanter is mainly composed of feeder, seedling guide tube, seedling support device, ditch opener and soil covering roller. When working, after manual seedling separation, the seedlings are put into the feeding barrel of the feeder. When the feeding bucket moves to the top of the seedling guide tube, the valve under the feeding bucket opens, and the seedlings fall into the seedling guide tube by gravity. Put the seedlings into the seedling trough of the seedling opener by tilting the seedling guide tube. Under the support of the grid-type seedling support device, the seedlings are in an upright state, and then trenching and covering are performed. Under the action of the overlying water flow formed between the compaction wheels, the soil is covered and compacted to complete the planting process. New users may not know the basic mode of operation.    1. Adjust measures to local conditions. If there are more rocks in the field, it is recommended to use other agricultural tools for farming.   2, correct operation. Use the power combination first, and then slowly put down the agricultural tools, so that the blades of the rotary tiller slowly enter the soil in advance, and the agricultural tools must be improved first when rotating, otherwise the transmission parts will be easily damaged.    3. Model matching. The length of the square shaft and sleeve of the universal joint should match the type of farm tool. If the square shaft and sleeve are too long, the transmission parts will be damaged during use. If the short shaft and sleeve are too long, the agricultural tools will be exposed when the agricultural tools are taken out.   4, Corn Sheller is installed correctly. When the universal joint is installed, the forks should be on the same plane to ensure uniform rotation of the knife shaft. Otherwise, the transmission components are easily damaged. It should be noted that the angle between the square axis of the universal joint and the plane of the gear box should not be greater than 10, and the angle between the square axis of the universal joint and the plane of the gear box after the farm tool is raised should not be greater than 30. Otherwise it will affect the transmission efficiency and affect the universal joint    5. Scientific maintenance. Lubrication and maintenance should be carried out as required. Do not omit oil injection and grease injection at the lubrication point to reduce damage caused by dry friction.
  10. luhongxiang

    How To Adjust Manual Fertilizer Seeder

      Manual Fertilizer Seeder is an important agricultural equipment in agricultural production. The existing transplanting machine has a complicated structure, a wide application range, and is difficult to operate. The disadvantage is that the seedling throwing technology is complicated. Therefore, it also affected the promotion of equipment.    Aiming at the above shortcomings, a semi-automatic equipment with compact structure, convenient use and adjustment, and wide application range is provided. The structure of the technical scheme adopted by the utility model to solve the technical problems includes a frame, a transmission system, a seedling transplanter assembly, a seedling throwing device assembly, a main seedling frame, an auxiliary seedling frame, a soil covering compact assembly, a seat, etc. The system is located on both sides. It is the power source of the machine, including the ground wheels. Active sprocket, passive sprocket, chain, etc.; the transplanter assembly is located in the middle of the frame, and can be installed according to the size of the supporting power-group to six groups; the seedling thrower assembly is located above the transplanter assembly; with seedlings The tray frame is located above the transplanter assembly and outside the seedling thrower assembly; the main seedling tray frame is located on both sides of the rear beam of the frame, and the seedling tray is placed on it; the soil covering suppression assembly is located behind the transplanter assembly, it Including earth-covering wheel and earth-covering wheel adjustment mechanism; seats are installed on the longitudinal beams on both sides of the frame. Compared with the prior art, the existing semi-automatic equipment has the advantages of compact structure, convenient use and adjustment, wide application range, and high seedling accuracy. It solves the existing problems of the equipment, so it has a good market prospect.    So what kind of adjustment do we need to make before using the vegetable transplanter? Let's take a look.    1. On a flat and hard ground, the triangle suspension of the four-wheeler is connected to the equipment, the machine is adjusted to a horizontal position, and the length of the pull rods on both sides of the four-wheeler is fixed to the same length. 2. Four-wheel vehicle hanging pepper transplanter, take a small amount of paper tube without seedlings and put it on the conveyor belt, drive the wheel at a constant speed to make the paper tube slowly drop, and observe that the ditching machine after the paper tube drops 1-2 cm vertically. Yes, otherwise adjust the trencher or clamp sowing    3. During the transplanting process, keep the equipment level. The proper depth of the trencher is the depth of the central axis of the trenching board. The transplanting depth is adjustable, the handle is clockwise deep, otherwise shallow.    For a long time, vegetable transplanting has been manual operation, with high labor intensity, low production efficiency and poor transplanting quality. At the same time, it is difficult to achieve the consistency of operating parameters such as plant spacing, which not only affects the quality and yield of vegetables, but also affects the subsequent field management and harvest mechanization. Therefore, our company adheres to the combination of R&D and introduction and demonstration, and gradually promotes Corn Sheller to farmers' vegetable gardens, reducing the labor intensity of vegetable farmers, increasing production efficiency, increasing farmers' safety production level, and the quality and yield of vegetables.
  11. 1. Because the Corn Sheller working environment of threshing machine is very harsh, it is necessary to carry out safe operation education for the personnel participating in the operation in advance to make them understand the operating procedures and safety common sense, such as tight sleeves, masks and protective glasses, etc. 2. Before use, you must carefully check whether the rotating parts are flexible and collision-free, whether the adjustment mechanism is normal, and whether the safety facilities are complete and effective; to ensure that there is no debris in the machine, all lubricating parts must be filled with lubricating oil. 3. The work site should be cleaned up before starting the machine, and no debris that has nothing to do with threshing should not be placed; children should be prohibited from playing on the edge of the site to avoid accidents. 4. The corn cobs should be fed evenly during work, and stones, sticks and other hard objects should be prevented from being fed into the machine. 5. The joints of the transmission belt should be firm, and it is strictly forbidden to pick up the belt or contact any object with the transmission part when the machine is running. 6. The transmission ratio between the supporting power and the threshing machine must meet the requirements, so as to prevent the thresher from being too high speed and vibrating, causing damage to parts or loose fasteners and causing personal injury. 7. It can not work continuously for too long. Generally, it is necessary to stop the machine for inspection, adjustment and lubrication after working for about 8 hours to prevent serious friction causing wear, heat or deformation. 8. The thresher generally uses diesel engines as power, and a fire cover should be worn on the exhaust pipe to prevent fire. 9. If the Manual Corn Seeder breaks down during the operation, it should be shut down before maintenance and adjustment.
  12. What are the characteristics of Knapsack Fertilizer Machine? Knapsack Fertilizer Machine is divided into medium, large and small. The functions of the small livestock management machine are as follows. One of the characteristics is economy, efficiency and practicality. The second feature is small size, light weight, flexible operation, safe and convenient. Especially suitable for use in greenhouses, rice fields, orchards, vineyards, terraces, slopes and narrow spaces. The third feature is its versatility. Farmers can make a lot of money by changing the tools used in various agricultural activities (ridge cultivation, drilling, agriculture, etc.). The small lawn mower is a multifunctional agricultural machine that can replace various operating parts with a universal frame, and can perform operations such as seeding, tillage, soil tillage, top dressing and spraying. Installing special tools for tea gardens can fertilize tea gardens, loosen soil, weeds and curved ground, and save energy and time. Do you understand the characteristics of Corn Sheller?
  13. Vegetable Planter, as an agricultural machine that replaces manual seeding, has gradually replaced manual operations this year. China has played an irreplaceable role in the process of this agricultural country. So today we will sum up what are the broad applications of corn Planting Machine in the seeding of various crops? One: The widespread nature of the sowing environment. The previous Planting Machine was large in size and driven by diesel power, so it was only suitable for farming large plains and required professional personnel to operate it. However, with the increasing demands of people, the demand for mountain operations, low-lying land operations, and uneven arable land is also increasing. Then the requirements for a lightweight, multi-adaptive small Planting Machine are highlighted. Nowadays, most corn planting machines are developed based on this. 2: The wide range of planting crops. Due to the variety of crops currently cultivated by farmers, the depth and span of each crop are required to be different, so this requires the corn Planting Machine to be a kind of adjustable nature and adapt to local conditions. , Change at any time, only in this way can reduce the farming labor of farmers. You don’t need to farm, you need to change to another machine. Multiple use of one machine has become the characteristic advantage of the current corn Planting Machine. Three: The breadth of corn Planting Machine operators. The current corn Planting Machine is mostly operated by two people. And no professional training is required, and most people can do the job after the instructions are used. Such farming efficiency is very high, and there is no need to worry about the quality of farming. Because the principle of the next plant has been improved by new technology. The previous situation of no seeding and less seeding is gone. Corn Planting Machine, as an important tool for agricultural planting in the new era, has now reached thousands of households. Its extensive use has been universally praised by farmers' friends and has made an indelible contribution!
  14.    Sweet potato, also known as sweet potato, is planted in a large area and widely distributed in my country. Different varieties have different planting agronomy, and the same variety and different regions have different planting agronomy. The diversity of agronomic requirements is the difficulty of mechanized transplanting of sweet potatoes, and the promotion of Knapsack Fertilizer Machine lies in economic benefits.    The whole planting process of sweet potato can be divided into four steps: soil preparation, planting, management and harvesting. Among them, land preparation includes deep ploughing, rotary tillage, fertilization, ridging, etc.; planting includes transplanting potato seedlings and watering; management includes weeding, ridging and top dressing; harvesting includes grape cutting and harvesting. In the stage of land preparation, the average operation cost of deep tillage per mu is RMB 40; the average operation cost of rotary tillage is RMB 30; the cost of organic fertilizer application is RMB 30, and there is no fertilizer cost; the cost of compound fertilizer application can be operated at the same time as rotary tillage, and the cost is higher Not calculated separately; the ridging fee is 30 yuan, which is generally completed at the same time as the rotary tillage, and is not calculated separately. Therefore, the total cost of breeding is about 70 yuan per mu.   In the planting stage, without using the Knapsack Fertilizer Machine, the average labor for planting seedlings per person per day is 0.8 mu, and the salary varies from place to place. Calculated at 80 yuan/day, the transplanting cost per mu is 100 yuan. In North China, drip irrigation is the main irrigation method. The manual paving cost is 20 yuan/mu, which can be used in the ridging process. This fee is not calculated separately.   In the management stage, weeding is a relatively complicated task, and the cost is more difficult to calculate. In some areas, weeding requires a lot of manpower. The sweet potatoes grown in the northern regions are transplanted on mulch, which solves the problem of weeding. Ridge support is not carried out in some areas, and the operation cost is 40 yuan/mu. The cost of top dressing is estimated to be 20 yuan/mu.   In the harvest stage, most areas of our country have realized the mechanized grape picking, not counting the labor cost.    At present, the area of sweet potato planted in Jiangnan is smaller than that of the Yellow River Basin. The above is the cost of manual transplantation. Of course, there are some differences between regions   The characteristic of Corn Sheller is to increase planting efficiency and reduce labor, thereby reducing costs and increasing benefits. In addition, mechanized planting can also increase planting quality and yield, thereby increasing income. In addition, growth period and planting agronomy are important factors affecting the yield of commercial potatoes, and mechanized transplanting has many advantages. Since machine planting is much faster than manual planting, mechanized planting can shorten the planting cycle and increase the growth time of sweet potatoes, which also means that it can increase the yield of sweet potatoes.
  15. The small Corn Sheller is a new type of low-cost agricultural machinery that can harvest corn stalks. The small Corn Sheller is researched and developed for the development of new energy and reducing the labor intensity of farmers' friends, shortening the labor cycle of farmers and freeing people from heavy physical labor. A brief introduction to the installation and debugging method of the small Corn Sheller: 1. Check whether the front bumper of the small Corn Sheller is level. Correct the non-level front bumper before installing the lifting frame. 2. Install the lifting frame on the bumper of the tractor, and then use the pressing plate to tighten it with screws, and then connect the two inclined flat irons at one end on the lifting frame, and connect the other end to the connecting seat welded on the tractor beam and fix it . Ensure that the small Corn Sheller has good stability. 3. The connection between the host and the elevator is through the four U-shaped cards on the host and the two front supports on the lower part of the lifting frame. The two U-shaped cards on the upper part of the lifting frame pass through four cylindrical pins and two movable lifting plates to hold the host Connect with the lifting frame. 4. Two B-type V-belts are connected to the diesel engine and the reducer of the harvester. After installation, do not press the tensioner too tightly when the small Corn Sheller is harvesting normally, as long as the V-belt does not slip. 5. The small Corn Sheller should be idling for 5 minutes after the assembly is completed, and then run at high speed for 6 minutes. After checking that there is no abnormality in the various parts, the field operation can be carried out. 6. When harvesting in the field, because the small Corn Sheller is conveyed on the right side, the harvesting method of turning around the plot can be used to improve the harvesting efficiency. 7. After using the Knapsack Fertilizer Machine for a period of time, especially after using it on sandy soil, the cutting edge of the Knapsack Fertilizer Machine wears and becomes blunt. When cutting the cutting edge, prevent overheating and dripping to cool down, so as not to reduce the durability of the cutting edge.
  16. luhongxiang

    How Does Corn Sheller Work?

    (1) Inspection of technical status Before the Knapsack Fertilizer Machine goes to work, check whether the various parts are deformed, whether the fasteners are loose, whether the fastening, transmission, cultivation, and adjustment systems are flexible, and whether the double-disc opener and the lifting mechanism of the opener are deformed. (2) Adjustment of line spacing, broadcast volume and marker The row spacing is determined according to the technical requirements of agricultural production. The number of openers n that can be installed can be calculated according to the following formula:    n=L effective/ b +①    L effective: effective beam length of the opener mounting frame b: row spacing    If the calculated opener is singular, the middle opener is installed in the middle of the opener mounting frame; if it is even, the symmetrical center of the mounting frame is installed on both sides.    When the transmission speed ratio is fixed, use the sowing amount adjustment handle to change the working length of the seeding groove wheel to change the sowing amount. The longer the slot wheel enters the seeding box, the larger the seeding volume; otherwise, the smaller. According to the requirements of agriculture and production, the actual seeding amount q can be calculated according to the following formula:    q = sowing rate per mu (kg/mu) × π × Knapsack Fertilizer Machine wheel diameter (m) × number of turns of the wheel × row spacing (m) (1 + wheel slip coefficient) / 666.7 (kg)    The specific method is to support the Knapsack Fertilizer Machine, make the seed box level, the ground wheel can rotate freely, put down the opener, and place the sowing amount adjustment handle on the appropriate position. Add a certain amount of seeds, and include a flat seed surface, and connect an inoculation bag under the seed tube. Then, at a speed similar to the official field operation speed, evenly rotate the walking wheel 20-30 times, weigh out the amount of seed in each inoculation bag, and compare it with the actual calculated sowing amount q after recording (the actual calculation of the wheel slip The coefficient is generally taken from 0.05 to 0.1).    Marker length calculation. In order to make the row spacing of the two adjacent row spacings normal, avoid replay and missed sowing, and guide the tractor to drive correctly, the marker length L is aligned with the centerline of the tractor: L=(B+b)/2 For example, when the tractor is driving off-position, the front right wheel of the tractor is often aligned with the mark, so that the length of left and right marks are different: Lleft(B+b)/2+A/2, Lright(B+b)/2 -A/2, B: sowing width b: row spacing A: tractor front wheel center distance (3) Trial broadcast Before Corn Sheller is operated, field trials should be carried out, and the seeding rate, seeding depth (to be achieved by adjusting the depth of the trench opener), soil quality, adjacent row spacing, etc. should be checked and adjusted until all items meet the requirements. Carry out formal planting operations.    First calculate the seed quantity Q (kg) that should be sown in one round trip: Q=2 mu sowing amount (kg) × sowing width (m) × sowing stroke length (m)/666. Then add a certain amount of seeds in the seed box and scrape them flat, make a mark, and add a round trip of the seed to be sown into the seed box for sowing. After playing a round trip, see if it is flush with the mark; if it is inconsistent, adjust the handle position appropriately, and then perform trial broadcast until it meets the requirements. (4) Inspection of seeding quality    often use the groove wheel working length template to check each meter to see if there is any change. Randomly select more than 10 measuring points along the diagonal of the plot to check the seeding depth, and the deviation shall not exceed plus or minus 1 cm. Check the actual seeded number m per meter length in the sowing line, m can be calculated as follows:   M = sowing rate per mu (kg/mu) × row spacing (m) × 106/666. 7 thousand-grain weight (g)    Corn Sheller manufacturer: After sowing a certain plot and a certain area, check the sown area and the actual sowing amount with the sowing amount per mu, and adjust if it does not meet the requirements.
  17. Right now, it's the end of April, the busy farming season has arrived, and Knapsack Fertilizer Machine as a good helper for our farmer friends inevitably brings us a lot of convenience, but also needs our extra care. Only when we treat it seriously and meticulously, can he serve us more friendly, cultivate a lower land for us, and sow and fertilize us. Isn't that the truth? So, in this busy period of farming, there are many things that we need to pay attention to. So, what are the things that need to be paid attention to? From the perspective of our past years of summarizing the use of the pastoral management machine, there are no more than several situations, which we pay special attention to. First of all, after the one-year period is corrected, whether it can operate normally. When it is transported to the field, should we check it in advance? Sometimes, it looks good when put up, but when it is used out, Sometimes it's possible that something of this or that kind of glitch occurred. Secondly, after a long time of non-use, the lubricating oil inside has solidified and aged, and the changed one can be replaced. Otherwise, it will cause difficulty and unsmooth operation of the bearing, which will not only reduce efficiency, but also Will cause more rapid wear of gears. The above are some aspects carefully managed by our Corn Sheller manufacturer for you. Please pay special attention to it. Please pay attention to the majority of new and old users.
  18. luhongxiang

    Diesel Cleaning Of Manual Corn Seeder

    Threshing corn for three times has a better threshing effect on wet corn special-shaped corn. During operation, the motor drives the threshing roller, the fan rolls to put the corn into the feeding hopper, the corn cob automatically slides down and enters the threshing chamber. Under the effect of the threshing rib on the right threshing roller, it first collides with the swinging screen. The impact of the threshing screen under the right threshing roller, the corn cob is pushed by the impact to cause the corn kernels to fall. The corn cob is driven to the left side of the right threshing roller, and enters the operating area of the left threshing roller under the effect of the stopper bridge plate. The corn cobs are threshed for three times, and the corn cobs that pass threshing three times are thrown out of the outlet. It realizes the separation of corn kernels and solves the problems of unclean threshing and low efficiency of single-roller Corn Sheller on the market. It is widely used for corn threshing. Newly purchased agricultural machinery will generate a lot of dust and debris after use, especially Corn Sheller, corn combine harvester, etc. First of all, the triangle belt of the new Corn Sheller should be removed, and the oil and sludge on it should be cleaned up. It should not be exposed to acid and alkaline substances and stored alone. Secondly, we need to open the new Corn Sheller inspection layer by layer. The machinery is composed of parts and devices, and each performs its own duties. At this time, all the external protective covers should be opened to sort out the remaining debris and dust to ensure that there is no Affect the normal operation of the machine. 1. Clean the diesel filter, oil filter element (or oil filter) regularly as required; clean or clean the air filter regularly. 2. Clean up the grass clippings, straw and other dirt in the engine cooling water tank radiator, hydraulic oil radiator, air filter, etc. 3. Clean the dust, glumes, stalks and other attachments that adhere to the surface of the Corn Sheller, pay special attention to the arrangement of reel, header agitator, straw support, cutter, drum, concave screen, vibration plate, cleaning Select the attachments at the screen, several engines, crawler walking devices, etc. 4. Sort out the mud and straw in the transmission belts and transmission chains. Many mud blocks will affect the balance of the wheels, and the straw may ignite due to conflicts. 5. Regularly release the water and mechanical impurities in the diesel tank and diesel filter of the Manual Corn Seeder.
  19. luhongxiang

    Introduction Of Corn Thresher Seed

    Manual Seeder is a planting machine that uses corn seeds as the sowing object. It can also take into account crops such as soybeans. The proper use of Manual Seeder is very important for farmers. So what are the precautions for using Manual Seeder? (1) It is very important to choose a high-quality Manual Seeder. Its uniform seeding, consistent depth, stable row spacing, and seed saving are all our selection criteria; (2) The frame cannot be tilted. After the planter is connected to the tractor, it should not be tilted. The frame should be horizontal before and after the work. (3) To ensure the effectiveness of seeds, to achieve no small, unfavorable, and mixed; (4) In order to ensure the quality of sowing, before planting a large area, we must insist on trial sowing 20 meters and observe the working condition of the planter. The above are the questions we need to pay attention to when we plant Corn Thresher. If you have any needs, you can call for consultation.
  20. luhongxiang

    The Organize Manual Corn Seeder

    Threshing corn for three times has a better threshing effect on wet corn special-shaped corn. During operation, the motor is driven to drive the threshing roller, and the fan rolls to put the corn into the hopper. The corn cob automatically slides down and enters the threshing chamber. Under the effect of the threshing rib on the right threshing roller, it first collides with the swinging screen. The impact of the threshing screen under the right threshing roller, the corn cob is pushed by the impact to cause the corn kernels to fall. The corn cob is driven to the left side of the right threshing roller, and enters the operating area of the left threshing roller under the effect of the stopper bridge plate, and undergoes three threshing. The corn cobs that have passed threshing three times are thrown out of the discharge port. It realizes the separation of corn kernels and solves the problems of unclean threshing and low efficiency of single-roller Corn Sheller on the market. It is widely used for corn threshing. How to organize Corn Sheller Newly purchased agricultural machinery will produce a lot of dust and debris after use, especially Corn Sheller, corn combine harvester, etc. First of all, the triangle belt of the new Corn Sheller should be removed, and the oil and sludge on it should be cleaned up. It should not be exposed to acid and alkaline substances and stored alone. Secondly, we need to open up the new Corn Sheller inspection layer by layer. The machine is composed of parts and devices, and each performs its own duties. At this time, all external protective covers should be opened to sort out the remaining debris and dust to ensure that it is not Affect the normal operation of the machine. 1. Clean the diesel filter, oil filter element (or oil filter) regularly as required; clean or clean the air filter regularly. 2. Clean up the grass clippings, straw and other dirt in the engine cooling water tank radiator, hydraulic oil radiator, air filter, etc. 3. Clean the dust, glumes, stalks and other attachments that adhere to the surface of the Corn Sheller, and pay special attention to sorting out the reel, header agitator, straw support, cutter, drum, concave sieve, vibrating plate, and cleaning Select the attachments at the sieve, engine seats, crawler walking device, etc. 4. Sort out the mud and straw in the transmission belts and transmission chains. Many mud blocks will affect the balance of the wheels, and the straw may ignite due to conflicts. 5. Regularly release the water and mechanical impurities in the diesel tank and diesel filter of the corn peeling and thresher. The method of sorting Manual Corn Seeder is reflected in many details, so everyone should try their best to sort out and promote the smooth use of later
  21.   Manual Corn Seeder can not only generate electricity, spray pesticides, pump water, spray, etc., but also tow a trailer for short-distance transportation. However, when maintaining the Manual Corn Seeder, the quality of the fuel is very important. So, how does fuel quality affect the maintenance of the four-wheel drive Manual Corn Seeder?    The maintenance of Manual Corn Seeder should pay attention to the quality of fuel, which not only makes the machine power insufficient, but also accelerates the wear of the oil pump and the core sleeve. The quality of lubricating oil directly affects the start-up performance and service life of Manual Corn Seeder, so it cannot be careless. We often ask our regular customers about the use of Manual Corn Seeder, and users report that they have been using our Manual Corn Seeder very well because they lack lubricating oil and adding recycled oil in one operation. As a result, the performance of the machine was completely degraded, and the problem was resolved only after the overhaul. Therefore, we must pay attention to the impact of fuel quality on the maintenance of Manual Corn Seeder.   Secondly, after the Manual Corn Seeder is operated, the necessary tightening and component adjustments must be made in time, because after the Corn Sheller has been used in many places for a period of time, the gap of some components will increase, and the user should make the necessary adjustments by themselves.
  22. luhongxiang

    Safety Knowledge Of Manual Corn Seeder

       In recent years, with the continuous increase in the number of Corn Sheller in our province, the corn harvest area has been expanded year by year. The popularization and use of Corn Sheller not only reduces the labor intensity of farmers, but also increases the economic income of the operators, and at the same time promotes the mechanization of corn harvesting. However, Corn Sheller operators and drivers must drive safely and understand and master maintenance knowledge to ensure the safety of persons and Corn Sheller. Now introduce some Corn Sheller safe operation and maintenance knowledge for the reference of the majority of operators.    1. Operational safety regulations    1. Before starting the engine, carefully check whether the shifting lever is in the neutral position, whether the main clutch and the unloading clutch operating handle are in the separated position, and whether the rotating parts are entangled with stalks or weeds. If there are any, they should be removed immediately. 2. Before starting the engine, it should be carried out under good ventilation conditions. Do not start in the garage to prevent the driver from suffocating. 3. It is not allowed to start the motor when the Corn Sheller inspection is not done. 4. When the Corn Sheller is working or the engine is turned off, there is idling rotation, disassembly, adjustment, and maintenance are not allowed. The driver must not leave the locomotive and do not approach the rotating parts. 5. Corn Sheller is not allowed, when there is no oil or the oil pressure is too low; the engine has knocking cylinders, if the above situation is encountered, the engine should be turned off and stopped immediately, strict inspection, troubleshooting, and restart. 6. If there is a "speeding" phenomenon, you should immediately turn off the engine and check and troubleshoot. If the flameout handle fails, the air inlet should be blocked to implement emergency flameout. 7. During the lunch break, be sure to lower the header of the Corn Sheller to the lowest position and return the grain bin to the rack. 8. The Corn Sheller should be parked on a flat ground. If it is parked on a slope, the hand brake should be tightened, and the front wheel should be blocked with wooden sleepers to prevent the locomotive from slipping. 9. Before starting the engine, the engine power output clutch should be in the disengaged state, the travel gear lever should be in the neutral position, and the handbrake should be tightened and locked. It is strictly forbidden to start the engine when the clutch is engaged. 10. Before the engine is turned off, the travel gear lever must be placed in the neutral position, the engine clutch shall be disconnected, and the hand brake shall be tightened and locked after the engine is turned off. 11. When starting the corn combine harvester, you must first honk the horn to send out the start signal, and start the machine only when there is no one near the locomotive or the car. 12. The cross slope of the work site should not be greater than 8°, the driving cross slope should not be greater than 8°, and the driving longitudinal slope should not be greater than 25°. High-speed driving on slopes is strictly prohibited. When going up and down, gear shifting is not allowed. 13. When Corn Sheller is working in the ground, do not drive in parallel or park under the high-tension line if there is a high-tension line at high altitude. 14. When the ear box is raised to unload grain, it is strictly forbidden for all personnel to work or watch in, below and around the ear box to prevent accidents from hurting people. It is strictly forbidden to use hands, feet and other people to assist in unloading grain. 15. It is recommended not to use the corn combine harvester in rain and fog. The fire extinguisher is installed in the cab, on the left side of the driver's seat. 16. When Corn Sheller is turning, it must lift the stalk shredder and reduce the speed of the locomotive. 17. When the Corn Sheller header is raised, it is prohibited to work under the header or inspect the machine. Under special circumstances, the lifted part or under the header should be supported with sleepers, and the safety card on the supporting cylinder should be put down. After confirming the safety, inspection and maintenance should be carried out to avoid casualties. 18. When the Manual Corn Seeder is harvested in the field, it is strictly forbidden to stand on other parts such as the grain bin or on the platform. 19. In an emergency, when the driver quickly stepped on the clutch pedal, the foot brake and hand brake should be braked at the same time to avoid collisions, rollovers and other accidents. Under normal circumstances, use the foot brake to brake. When the locomotive is driving downhill, the speed must be slow, the neutral gear is not allowed to slide, and the brakes cannot be sudden, otherwise it will cause a rollover accident. 20. After the engine is turned off, the key switch should be turned off in time. When the locomotive will not be started for a long time, the key should be pulled out to turn off the main power switch. 21. Always check the reliability of the brake and steering system. When the engine or oil circuit fails, the steering wheel is still used. At this time, the corn harvester can only drive at 1 speed and eliminate the problem as soon as possible.
  23. When purchasing a Seeding Machine, how to judge the high or low price of the Seeding Machine firstly depends on the following 4 points: (1) How many functions: When choosing a machine, a farmer asks to know which functions are needed and which accessories are matched. Many accessories are expensive, but few accessories are low in price. Some manufacturers reduce the number of accessories in order to reduce costs. This is a measurement used by some manufacturers, so buying a machine is a must Ask to understand how many sets of accessories, such as 6 sets of accessories and 2 sets of accessories, the price difference is as little as a few hundred yuan, so when farmers buy machines, the price is low depending on whether the accessories are reduced, not just the price, but the cost performance. (2) Frame size: The most widely used normal frame size is 1.6 meters long * 0.7 meters high * 0.5 meters wide. The handle can be rotated 360 degrees, and the handle height can be adjusted in 4 levels. There are 2 sets of gearboxes, walking boxes and ditching boxes. High and low gears can go forward and backward. Now some manufacturers have made smaller gearboxes and reduced gears in order to reduce costs. Although the cost price has been reduced, it will greatly affect the performance and life of the machine. What is more, the new machine will be scrapped within a year. , This is the reason! (3) Thickness of materials used: In the production process, some manufacturers use thin materials to reduce costs. For example: a steel plate with a thickness of 5mm, and a thickness of 2mm, the price difference is several times the difference, and there is a bearing with 80 yuan each, there are 30 The price difference is definitely not a grade. Of course, cheap bearings can also be used, and shelves made of thin materials can also be used temporarily. This is why the price of the machine is different for the same function. Similarly, why some machines are used In 10 years, some machines will have to be overhauled in 1 year. Agricultural machinery is not an ornament, and the quality of the machine's materials can't fool people!  (4) Rice Planting Machine engine brand and horsepower: The same engine model, the same horsepower, different engine brands, the price gap is also between 200---1000 yuan, this gap is still quite large in the total price, so farmers must calmly and objectively compare when buying machines, and It is the size of the engine horsepower, and the price gap also ranges from 200 to 2000.
  24. luhongxiang

    Attention To Seed Planter's Work

    The production of Corn Sheller greatly improves the work efficiency of corn removal, which is hundreds of times that of manual corn removal. It has strong practicability and makes friends a good helper for getting rich. However, there are some problems with mechanical operation. The problem that more people have heard is: Corn Sheller is not clean, which will cause a decrease in output, a waste of resources, and cause economic losses, which will affect us more seriously. The life span of Corn Sheller. The Corn Sheller manufacturer today introduces several ways to quickly solve the unclean threshing machine threshing machine. Hope it can help you. 1. Threshing is not clean Reasons: the feeding amount is too large or the feeding is uneven; the threshing gap between the grain bar and the concave plate is too large; the drum speed is too low; the grain is too wet. Adjustment method: 1. Reduce the feeding amount and feed evenly. 2. Adjust the threshing gap correctly, and replace the severely damaged parts immediately. 3. The belt pulley of the power machine and the belt pulley of the threshing machine should be coordinated reasonably. If the pulley slips and loses rotation, the tension pulley should be adjusted to tighten the belt. 4. Grains with excessively wet straws should be properly ventilated and dried before threshing. 2. The cleanliness of the kernels is poor   Reason: The air volume of the fan is not enough. Most of the fans are too loose, causing the belt drive to slip, causing the fan speed to fail to reach the design index, or the loosening of the fan pulley screw causes the pulley to run idly, which cannot normally drive the fan to rotate; crop stems in the drum The amount of stalk entering is too much. Adjustment method: 1. Check the tightness of the fan drive belt. If it is too loose, adjust the tension wheel as much as possible to tighten the pulley to an appropriate level; if the fixing screw of the fan pulley is loose, tighten it. 2. Reduce the feeding amount or adjust the feeding gap correctly. The above Corn Sheller introduced to you that when we used Corn Sheller, due to the poor threshing or poor cleanliness of the seeds, I helped the farmers do an analysis, and hoped to help more people. Seed Planter has too many grains broken during use. Where is the problem? I searched for this problem on Google. There are still many people who consulted. It can be seen that the seriousness of this problem still needs our Seed Planter manufacturers to explain. Here you can not only see the problem of too much broken seeds, but also understand that if we threshing, too much threshing will cause extremely serious clogging.
  25. Corn Sheller is now an indispensable helper for farmers and friends, and it is also a relatively common agricultural equipment. However, personal safety injuries are caused by improper operation every year, so the safe production operation of Corn Sheller is very important. 1. Pay attention to the operation of Corn Sheller: whether it is operating normally, and make sure that it is in production after normal; 2. When Corn Sheller is produced, try to avoid direct feeding by hand, or put your hands into Corn Sheller; 3. Avoid putting metal or other sundries into Corn Sheller by accident, causing safety hazards to Corn Sheller production; 4. After the production is completed, cut off the power first, and clean and inspect the Corn Sheller to ensure that the Corn Sheller article comes from: There are other sundries inside; 5. Timely replacement of vulnerable parts inside Seed Planter.