Jump to content
Banhammer Forums
weigaofasteners

How Should Full Threaded Stud Be Checked?

Recommended Posts

Fasteners indicate that the Full Threaded Stud generally goes through the cleaning process during the manufacturing process.  However, in such a necessary link, due to improper methods and other reasons, some problems occurred in the production process of Full Threaded Stud.  Here, the following small editor introduces the problems that are relatively easy to occur when cleaning the fullthreshold study.
We want to talk about what will happen to the cleaning after quenching. For the normal production process, after quenching, the full threshold study will use a solution with silicate for cleaning and then rinse. At this time, the operator needs to carry out the cleaning very carefully, because if he is not careful at this time, some dirt will remain on the full threshold study. Then such full threshold study is a product with substandard quality.
For this link introduced next, although it is somewhat out of touch with cleaning, it also needs to be soaked with a solution.  That is to say, when the Full Threaded Stud is tempered, fading will inevitably occur. After such a situation occurs, the better treatment method is to soak with ether.  However, oil-like residues will also appear in this way. The reason for this is that the Full Threaded Stud is not stacked properly during heating, resulting in oxidation during quenching.
As far as the current situation is concerned, the difference between Full Threaded Stud and standard parts is not big. the Full Threaded Stud manufactured according to the technical standards is the standard Full Threaded Stud, sometimes abbreviated as Full Threaded Stud.  The standard fullthreaded study is an important category of standard parts.  Full Threaded Stud is now basically a standard part, and is also a standard part for fastening classes. Most of the standard parts are Full Threaded Stud, but the range of standard parts is larger.  Therefore, their business scope is basically the same.
At present, many people have combined the Full Threaded Stud with standard parts. Full Threaded Stud is a general term for a type of mechanical parts used when two or more parts are tightly connected into a whole. It is also called standard parts in the market. Therefore, people need not stick to the difference between the two all the time, but only need to use it appropriately.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×