Jump to content
Banhammer Forums
Sign in to follow this  
Goldgold111

How to Maintenance of Beverage Can Making Machine?

Recommended Posts

First, theBeverage Can Making Machine adjusts the distance between the can support plate and the pressure head: loosen the backup cap on the guide shaft (screw) at the lower end of the can support plate, rotate the can support plate, and take the contact between the pressure head and the lid as the base point. Rotate the can-supporting plate upward by 2---3mm to tighten the spare cap.

Second, adjust the distance between the indenter and the sealing wheel: firstly adjust the left and right distance between the indenter and the first sealing wheel, based on the 0.5mm distance between the sealing wheel and the indenter, and the indenter and the sealing wheel will not rub against each other , The smaller the distance, the better; adjust the upper and lower distance between the indenter and the first sealing wheel, the lower end of the sealing wheel and the upper end of the indenter are subject to the minimum gap that does not contact. Next, adjust the distance between the indenter and the second sealing wheel in the same way.

Third, the gap between the pressure head of the beverage can making machine and the sealing wheel: can be adjusted according to the hardness of the lid. The iron cover can be adjusted closer. The aluminum cover can be adjusted farther. After adjustment, tighten the fixing screws and try to seal 2-------3. After checking that it meets the standards, it can work continuously.

Fourth, every time you change the tank type, you need to change the pressure head and the tank tray according to the size of the lid.

Fifth, mechanical maintenance: the motor is indispensable, the gear transmission part is added with lithium-based lubricating oil once a month, the motor spindle runs and the tank tray does not rise, adjust or replace the V-belt.

If you are interested in can making machine, welcome to your come and purchase!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×